Ricoh J-P2 - Page 251

17 January, 2003 PRINTER ENGINE SERVICE MODE
5-63
Service
Tables
7
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
[Total Scan Counter]
201
1 Total Scan Counter *
CTL
CF
Displays the total number of scans.
[ 0 to 9999999 / 0
/ 1 scan/step ]
[DUnit Op Ctr] Development Unit Operation Counter
1 P: B&W
2 P: Color
3 D: B&W
202
4 D: Color
*CTL Displays the number of prints or developments for
each mode.
[Feed Counter] Paper Feed Section Counter
1 Tray 1
2 Tray 2
3 Tray 3/LCT
4 Tray 4
5 By-pass
204
6 Duplex
*CTL Displays the number of sheets fed from each
paper feed station.
[ 0 to 9999999 / 0
/ 1 sheet/step ]
NOTE: The LCT is counted as the 3rd feed
station.
[ADF Total Counter]
205
1 ADF Total Counter *
CTL
CF
Displays the total number of originals fed by the
ARDF.
[Staple Counter]
206
1 Staple Counter *CTL Displays the number of stapler operations.
[Punch Counter]
209
1 Punch *CTL Displays the number of times hole punching has
been done.
[ 0 to 9999999 / 0
/ 1/step ]
[Copy Co.: Mag.] Copy Counter: Magnification
1
Reduce 25% <-->49%
2
Reduce 50% <-->99%
3 Full Size
4 Enlarge 101%<-->200%
5 Enlarge 201%<-->400%
6 Direct Mag.
7 Direct Size Mag.
301
8 Auto reduce/Enlarge
*
NV
CF
Displays the number of copies made with each
magnification ratio.
[Copy Co.: Copy Mode] Copy Counter: Copy Mode
1 Text
2 T/P (Glossy Photo)
3 T/P (Printed Photo)
4 T/P (Copied Photo)
5 Photo (Glossy Photo)
6 Photo (Printed Photo)
7 Photo (Copied Photo)
8 Generation Copy
9 Pale
10 Map
11 Punch
12 Repeat
13 Sort
14 Staple
15 Series
16 Erase
17 Duplex
304
18 ADF
*
NV
CF
Displays the total number of copies made in the
copy mode by each operation mode.