Ricoh J-P2 - Page 254

PRINTER ENGINE SERVICE MODE 17 January, 2003
5-66
7
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
[Total Jam]
502
1 Total Jam *CTL Displays the total number of jams detected.
[ 0 to 9999 / 0
/ 1 sheet/step ]
[Original Jam Counter]
503
1 Original Jam counter *
CTL
CF
Displays the total number of original jams.
[ 0 to 9999 / 0
/ 1 original/step ]
[Jam Location]
D: Duplex, MB: Mail Box, F; Finisher, E: External, I: Internal
ON: On check, OFF: Off Check
3 Tray 1:ON
4 Tray 2:ON
5 Tray 3/LCT:ON
6 Tray 4:ON
8 Regist.:ON
9 E Tray:ON
10 I Tray:ON
11 D:ON
12 D Exit 1:ON
13 D Exit 2:ON
14 D Exit 3:ON
15 D Feed: ON
20 MB Upper:ON
21 MB Lower:ON
51 Tray 1:OFF
52 Tray 2:OFF
53 Tray 3:OFF
54 Tray 4:OFF
61 Regist: OFF
63 E Tray:OFF
64 I Tray:OFF
65 D:OFF
66 D Exit 1:OFF
67 D Exit 2:OFF
68 D Exit 3:OFF
69 D Feed:OFF
100 F Entrance
101 F Shift Tray 1
102 F Shift Tray 2
103 F Staple
104 F Exit
105 F Drive
106 F Tray Up/Down
107 F Jogger
108 F Staple
109 F Exit
110 F Punch
504
111 F Jam Clear
*CTL Displays the number of jams according to the
location where jams were detected.
NOTE: The LCT is counted as the 3rd feed
station.
[Original Jam Detection]
1 At Power On
3
Skew Correction
Sensor (On Check)
505
4
Interval Sensor (On
Check)
*
CTL
CF
Displays the total number of original jams by
location.