17 January, 2003 MACHINE INSTALLATION
1-9
Installation
Item SP No. Function Default
PM warning
display 1
SP5-930-3 Specifies whether the PM warning for the
PCUs, development units, and fusing unit is
displayed when the replacement time arrives.
Click 1: Displayed
Click 2: Not displayed
"Click 1"
PM warning
display 2
SP5-930-4
to
SP5-930-5
Specifies whether the PM warnings for the
paper feed roller, transfer unit, and transfer
cleaning unit are displayed.
"No Alert": Not
displayed
Fax No.
setting
SP5-812-2 Programs the service station fax number.
The number is printed on the counter list when
the meter charge mode is selected, so that the
user can fax the counter data to the service
station.
Counter
reset
SP7-825-1 Resets the counters to "0."
Important: This must be done at installation
after all the above settings have been
finished. The negative counters used in the
meter charge mode will be reset to zero.
To Next Page
Loading...
