Ricoh J-P2 - Page 417

SPECIFICATIONS 17 January, 2003
SPEC-16
PLATEN/ARDF ORIGINAL SIZE DETECTION
Platen ARDF Size (width x length)
[mm]
Inches Metric Inches Metric
A3 (297 x 420) L No Yes Yes Yes
B4 (257 x 364) L No Yes No Yes
A4 (210 x 297) L No Yes No Yes**
A4 (297 x 210) S No Yes Yes Yes
B5 (182 x 257) L No Yes No Yes
B5 (257 x 182) S No Yes No Yes
A5 (148 x 210) L No No* No Yes
A5 (210 x 148) S No No No Yes
B6 (128 x 182) L No No No Yes
B6 (182 x 128) S No No No Yes
11" x 17" (DLT) Yes No Yes** Yes**
11" x 15" No No Yes** No
10" x 14" No No Yes No
8.5" x 14" (LG) Yes No Yes** No
8.5" x 13" (F4) No No Yes** Yes
8.25" x 13" No No No No
8" x 13"(F) No Yes No No
8.5" x 11" (LT) Yes No Yes** No
11" x 8.5" (LT) Yes No Yes** No
8" x 10.5" No No No No
8" x 10" No No Yes** No
5.5" x 8.5" (HLT) No* No Yes No
8.5" x 5.5" (HLT) No No Yes No
8K (267 x 390) No No No Yes**
16K L (195 x 267) No No No Yes**
16K S (267 x 195) No No No Yes
7.25" x 10.5"
(Executive)
No No Yes No
10.5" x 7.25"
(Executive)
No No Yes** No
*: When the message “Cannot detect original size” appears, use SP4-303 to
detect original sizes as A5 lengthwise/HLT.
**: The machine can detect the paper size depending on the setting of SP6-016-1.