TRANSFER AND PAPER TRANSPORT UNIT 17 January, 2003
3-26
7. Lay the transfer unit on its side. Grasp the upper end of the transfer belt and
pull the transfer belt [A] up and out.
NOTE: 1) If the transfer charge brushes are dirty, clean them with a vacuum
cleaner.
2) If the drive rollers are dirty, clean them with a damp cloth.
.
After replacing the transfer belt, perform forced line position adjustment (SP5-993-
002 or “Maintenance menu – Color registration - Auto Adjust” in User Program
mode).
G080R933.WMF
[A]
To Next Page
Loading...
