Message Causes Solutions
I-Fax POP3 Failed Connection to the POP3 server
failed.
• Confirm that the network cable is
properly connected to the machine.
• Confirm that the network settings such
as IP address, DNS, and POP3
settings have been configured
properly (make sure that no double-
byte character is used). See
page 297 "Configuring the Network
Settings".
Independent-supply
Toner: X
A non-supported print cartridge
is installed for the indicated
color.
Remove and replace it with a print
cartridge specified by an authorized
dealer.
Internal Misfeed Paper has been jammed in the
machine.
Remove the jammed paper. See
page 353 "Removing Paper Jams".
Memory Overflow The number of fax jobs in
memory (unsent or unprinted
faxes) has reached maximum,
so new jobs cannot be stored.
Wait until pending jobs have been
transmitted or printed.
Memory Overflow • The data is too large or
complex to print.
• If you try to print a Locked
Print file stored in the
machine with the printer
driver's [Gradation:] set to
[Fine] in the [Print Quality]
tab, printing may be
canceled depending on
the machine's current
memory usage.
• When performing printing
on Legal size paper under
certain print quality setting,
print data becomes too
large and the job may be
canceled.
• Select [600 × 600 dpi] in
[Resolution] under [Printer Features]
to reduce the size of data. See
page 248 "Printer Features Settings".
• Print or delete other Locked Print files
in the machine, and then print the
Locked Print file that the machine
failed to print. Alternately, resend the
Locked Print file to the machine with
[Gradation:] set to [Speed] or
[Standard], and then print the Locked
Print file.
• If using the PCL printer driver or DDST
printer driver, set [Gradation:] in
[Print Quality] to [Speed] or
[Standard]. If using the PostScript 3
printer driver, set [Print Quality] in
[Printer Features] to [Standard] or
[High Quality].
Error and Status Messages on the Screen
347
To Next Page
Loading...
