Ricoh Taurus-C1a - Page 101

Technical Bulletin PAGE: 53/58
Model: Taurus-C1 / P1 Date: 21-Oct-11 No.: RD074026
< Jam Codes >
The following description was deleted.
J002 Jam Release
Appendices
< Appendix: Specifications \ Main Specifications \ General Specifications: Copier
and Printer >
 “Index” was deleted from the supported media types for “Main 1
st
Tray”.
 “Index” was added as a supported media type for “Main 2
nd
Tray”.
 “Printed” was deleted from the supported media types for LCIT 2
nd
Tray.
 Supported custom paper size for Main 2
nd
Tray was corrected:
Width: 100 to 330.2mm  Width: 139.7 to 330.2mm
 Information on memory specification, dimensions, and weight of M044 was added:
Memory 1.5 GB (1 GB + 512 MB)
Dimensions 1320 x 910 x 1218 mm (52 x 35.8 x 47.9 in.)
Weight Less than 550 kg (1,210 lb.)
< Appendix: Specifications \ Main Specifications \ Copy Specifications >
“13 inch” was deleted from [Original Scales: Rear Scale] for North America.
Specifications on paper size detection for paper fed from mainframe were changed as
follows:
Before the Revision After the Revision
Paper Size Detection: Main
12"x18" SEF, A3 SEF, B4 SEF, A4 SEF/LEF, A5
SEF, DLT SEF, LG SEF, LT SEF/LEF, 8.5"x13" SEF,
HLT SEF, B5 SEF/LEF
Paper Size Detection: Main
12 x 18" SEF, A3 SEF, B4 SEF, A4 SEF/LEF, A5
SEF/LEF, DLT SEF, LT SEF/LEF, F (8 x 13")SEF,
HLT SEF/LEF, B5 SEF/LEF
< Appendix: Specifications \ Main Specifications \ Main Unit \ Engine >
Before the Revision After the Revision
Paper Registration System: Sub Scan
Registration Roller Buckle Adjustment
Paper Registration System: Sub Scan
Registration roller buckle adjustment with
registration gate, transfer timing roller speed timing
adjustment