Technical Bulletin PAGE: 1/1
Model: Katana-C2 (Bellini-C4) Date: 13-Apr-12 No.: RD059099
Subject: Service Manual Correction (Booklet Finisher
SR5020 Punch Unit)
Prepared by: J. Ohno
From: PP Tech Service Dept., 1st PP Tech Service Sect.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other ( ) Tier2
Please apply the following correction to your field service manual in the section:
1. Installation > Booklet Finisher SR5020 (D434-17)
> Punch Unit PU NA, EU, SC (D449-17, -27, -28) > Installation P.162
2. Attach the punch mechanism [A] to the rails of the punch unit .
z If you are installing the punch unit for Europe and North America, connect the harness [B]
.
z The punch unit for North Europe has no punch switching motor, so this harness is not required.
------------------------------------------------------------------------------------------------------------------------
In addition to the above, please be informed of the expected service life of the Booklet
Finisher SR5020 Punch Unit.
Punch unit life: 1000k
To Next Page
Loading...
