Technical Bulletin PAGE: 1/2
Model: Taurus-C1a/C1b (D074/D075)
Subject: Troubleshooting black streaks along feed direction
on back side
Prepared by: Yasutaka Yamada
From: 1st PP Tech Service Sec., PP Tech Service Dept.,
Mechanical
Paper path
Product Safety
Electrical
Transmit/receive
Other ( )
Service manual revision
Retrofit information
Tier 2
SYMPTOM
Black streaks (along the feed direction) appear on the back side.
The symptom usually occurs on the 1st and 2nd sheets of a job.
The symptom is observed in the area circled in red.