Technical Bulletin PAGE: 1/3
Model: Taurus-C1a/C1b/P1 (D074/D075/M044) Date: 02-Apr-12 No.: RD074059
Subject: Taurus-C1/P1: Procedure for Adjusting the CIS LED
upon Replacement of the CIS Unit
Prepared by: S. Sasaki
From: 1
st
PP Tech Service Sec. PP Tech Service Dept
Classification: Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other (Additional
Information)
Tier 2
This RTB has been issued to announce the procedures for adjusting the CIS LED upon
replacement of the CIS unit.
Please add the following procedure to your Taurus field service manual in the section:
4. Replacement and Adjustments > Right Drawer > CIS
Procedure
1. Remove the cover [A] (TCRU screw x3)
2. Remove the currently installed CIS unit [A]. (screw x2)
[A]
[A]
To Next Page
Loading...
