Technical Bulletin PAGE: 1/2
Model: Punch Unit PU5020 (D449) Date: 26-Mar-12 No.: RD074055
Subject: Dip Switch setting for the Punch Unit Prepared by: Shinnosuke Sasaki
From: 1st PP Tech Service Sec., PP Tech Service Dept.,
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other ( )
Action required
Service manual revision
Retrofit information
Tier 2
Please make sure to set the dip switch according to your location, when replacing the PCB
board for the Punch Unit. (D449).
Location of the Dip Switch
To Next Page
Loading...
