Ricoh Taurus-C1a - RTB 139: Service Manual Correction: Add SP mode

Technical Bulletin PAGE: 1/1
Model: Taurus-C1
Date: 8-Feb-17
No.: RD074139
Subject: Service Manual Correction: Add SP mode
Prepared by: Rie SHohda
From: 1st Tech Service Sect., PP Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety
Other ( )
Tier 2
Tier 0.5
Service Manual Correction
Please add the following SP to your FSM, in section:
2. Appendix: Service Program Mode Tables > Group 2000
2912
[Encoder Sn:Adj Light]
This SP adjusts the strength of the LED beam of the ITB feed-back sensors
(main sensor and sub sensor).
2
Light Amt Adj: Pass/Fail
[0 to 9 / 0 / 1 ]
Adjustment result codes
0 ： No adjustment performed
1 ： Success
2 ： Canceled
7 ： Failure of the main sensor
8 ： Failure of the sub sensor
9 ： Failure of the main and sub sensors