Technical Bulletin PAGE: 1/2
Model:
Taurus-C1 Date: 04-Nov-2011 No.: RD074031
Subject:
Service manual correction: Main frame’s and Fiery
installation
Prepared by: K. Tsutsui
From: PP Service Planning Department 1G
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other ( ) Tier2
Please apply the following 2 corrections to your service manual.
Correction 1:
Location of the incorrect description
2. Installation > Main Machine > Installation: Power on > Connect Main Machine to Power
Source and Power On
New Step 3:
After turning on the main power switch, close both of the front doors and wait for the unit to
warm up. (This takes approximate 5 minutes)
Next, follow the procedure in the service manual. (Start toner fill)
Delete the description with the red line
To Next Page
Loading...
