Ricoh Taurus-C1a - RTB 140: Service Manual Correction

Technical Bulletin PAGE: 1/1
Model: Taurus-C1/P1
Date: 28-APR-17
No.: RD074140
Service Manual Correction
Please add the following SC Codes to your FSM, in this section:
6. Troubleshooting: SC Tables SC500: Paper Feed, Transport, Duplexing
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC563-00
A
Overheat detection (software): Heating Roller NC Sensor
Heating Roller NC Sensor detected 255 degrees or higher 10
seconds consecutively.
Measurement period: 100 milliseconds
• Triac shorted.
• IOB board defective.
• Fuser Unit controller software runaway
• Replace the IOB board.
• Replace the Fuser Unit.
Subject: Service Manual Correction: SC table added
Prepared by: Sayaka Katoh
From: Sales Strategy Section，1st CP Business Department
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety
Other ( )
Tier 2
Tier 0.5