Technical Bulletin PAGE: 1/2
Model: Taurus-C1/P1 (D074/D075/M044) Date: 18-Jul-12 No.: RD074080
Subject: Notes on handling the PCDU
Prepared by: K. Tsutsui
From: 1
st
PP Tech Service Sec., PP Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other ( )
Action required
Service manual revision
Retrofit information
Tier2
This RTB has been issued to announce the following notes on handling the PCDU.
When servicing the PCDU, never remove the black plastic plate from the metal frame of
the PCDU (see the next page). Removing this plate could result in sharp bands that
appear at 50mm intervals as shown in the photo below.
About 5mm
-
width bands appear at 50mm pitch.
Bands approx 5mm wide appear in 50mm pitch.
To Next Page
Loading...
