Ricoh Taurus-C1a - RTB 119 a: NICE Ver.2.0 Instruction Manual

Technical Bulletin PAGE: 1/34
Reissued: 4-Jun-15
Model: Taurus-C1a/C1b/P1 (D074/D075)
Date: 17-Jun-14
No.: RD074119a
RTB Reissue
This RTB has been updated. Please refer to RTB No. RGnene078.
This is an instruction manual for NICE Ver.2.0.
Table of contents
1. Introduction ........................................................................................ 2
1.1. Outline ....................................................................................... 2
1.2. Supported models .................................................................... 3
1.3. PC requirement ......................................................................... 3
2. How to activate NICE .......................................................................... 4
2.1 Procedure ................................................................................. 4
2.2 Common procedure for scanning test charts ........................ 6
3. NICE Software Applications .............................................................. 7
3.1 SMC Tool .................................................................................. 7
3.2 Front and Back Registration Adjustment .............................. 7
3.3 FR Density Adjustment ......................................................... 11
3.4 Banding Analysis .................................................................. 17
3.5 Shock-jitter Finder ................................................................. 23
4. Appendix .......................................................................................... 25
Subject: NICE Ver.2.0 Instruction Manual
Prepared by: Hiroshi Inenaga,
Akihiro Tajima
From: 1st PP Tech Service Sec., PP Tech Service Dept.,
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other ( )
Action required
Service manual revision
Retrofit information
Tier 2