Ricoh Taurus-C1a - RTB 136: Replacing the ITB Drive Roller

Technical Bulletin PAGE: 1/3
Model: Taurus-C1a/C1b (D074/D075)
Date: 25-Apr-16
No.: RD074136
Subject: Procedure of Replacing the Drive Roller
Prepared by: Akihiro Tajima
From: 1st Tech Service Sect., PP Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety
Other ( )
Tier 2
Tier 0.5
Please add the following procedure of replacing the Drive Roller to your field service
manual.
NOTE: For the procedure required before replacing the drive roller, refer to RTB No.
RD074049 ‘Procedure for Replacing the Encoder Shaft.’
Drive Roller
[A]: Drive Roller
[A]