Technical Bulletin PAGE: 1/6
Reissued:01-Dec-11
Model:
Taurus-C1/P1 (D074/D075/M044) Date: 13-Sept-2011 No.: RD074022a
RTB Reissue
The italic item has been added.
Subject:
Reflect the value of SP1001-002 to Custom Paper
Settings
Prepared by: K. Tsutsui
From: 1st Tech Service Sect., PP Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other ( ) Tier2
This RTB was re-issued to provide explanation on the newly added SP1501.
Overview
The procedure as described in the original bulletin to check and apply the value of
SP1001-002 to optimize the registration in the sub scan direction (leading edge
margin) for each custom paper is no longer required on account of the newly added
SP1501. SP1501 was created to automatically reflect the optimum registration in the
sub scan direction for both generic and custom paper.
This revision explains the feature and benefits of SP1501, differences in the
specifications and the procedures in accordance with the addition of this new SP, and
firmware update information.
SP1501 is available with the following firmware combination.
Engine System Web Support
Copier (D074/D075) 1.58.04 1.07 1.06
Printer (M044) 1.58.04 1.03 1.04
To Next Page
Loading...
