Technical Bulletin PAGE: 7/7
Model: Taurus-C1a/C1b (D074/D075) Date: 21-Nov-11 No.: RD074033
Step 5. Mainframe height adjustment
5.1. Adjust the height of the mainframe so that the top edge of the mainframe bracket [A]
aligns with the top edge of the GBC StreamPunch bracket [B].
5.2. Adjust the height of the mainframe on the rear side as necessary.
Note: Make sure the top surface of the copier/printer is level after adjusting the height.
Checking the height and space after installing the GBC StreamPunch Tray
D074/D075/M044 copier/printer + GBC StreamPunch + D512/D513 finisher
2 mm
a
rox 0.1 inch
13 mm (approx 0.5 inch)
[B]
[A]
To Next Page
Loading...
