Technical Bulletin PAGE: 6/7
Model: Taurus-C1a/C1b (D074/D075) Date: 21-Nov-11 No.: RD074033
3.3. Attach the spacer cushion [A] (SPACER CUSHION: B8321371) to the top edge of
the punch unit.
Note: Use the special cushion for the top edge. For the remaining edges, use the
cushions supplied with the StreamPunch.
Step 4. Docking the GBC StreamPunch with the D074/D075/M044 copier/printer
4.1. Dock the GBC StreamPunch with the mainframe and set the fixing pin [C].
Note: Make sure the positioning pin [A] on the mainframe is inserted properly in the
location hole [B] on the GBC StreamPunch
[A]
[A]
[B]
[C]
To Next Page
Loading...
