Technical Bulletin  PAGE: 1/2 
Reissued: 22-Aug-14 
 
 
RTB Reissue 
The items in bold italics have been corrected or added. 
Subject: Firmware Release Note: Language Install 
From: 1st PP Tech Service Sect., PP Tech Service Dept. 
 Electrical 
 Transmit/receive 
 Service manual revision 
 Retrofit information 
 Product Safety                      Other (Firmware) 
 
This RTB has been issued to announce the firmware release information for the  
Language Install.
 
 
Note: Definition of Availability of RFU via @Remote 
“Available”: The firmware can be updated via RFU or SD card. 
“Not available”: The firmware can only be updated via SD card. 
 
Modified Points or Symptom Corrected 
SP1151-013 (Pressure Setting: Pressure Position 3) is available in the 
Advanced Setting for Skilled Operators (#0705).  This sets the length of time 
pressure is increased on the fusing roller by the pressure roller for printing 
Envelopes. 
Firmware requirements 
If you apply this firmware to activate the AC transfer function, be sure to upgrade all 
the firmwares listed in the following table together as a set. 
*In order to use the AC transfer function with the machine produced before 
December 2012, the AC power supply unit must be installed (See RTB# RD074097). 
 
Specification Changes 
1. The following adjustment functions are added to "Custom Paper Settings for 
Administrators". See "Notes for Users" of TCRU/ORU manuals for details. 
 
44: Txt Ppr: Ppr Trns Voltage: B&W: Side 1 
45: Txt Ppr: Ppr Trns Voltage: B&W: Side 2