Technical Bulletin PAGE: 1/7
Model: Taurus-C1a/C1b (D074/D075) Date: 21-Nov-11 No.: RD074033
Subject: Procedures for Installing the GBC StreamPunch Prepared by: Shinnosuke Sasaki
From: 1st Tech Service Sect., PP Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other ( ) Tier 2
Procedures for installing the StreamPunch
directly downstream from the D074/D075/M044
Copier/Printer
1. Overview
If you wish to install the GBC StreamPunch directly downstream from the
D074/D075/M044 copier/printer, do the following:
1. Order the special parts listed in the next section “2. Required Parts”.
2. Install the special parts according to the procedure in section “3. Installation”.
IMPORTANT
Never install the punch unit directly downstream from the main machine without
using the special parts listed in section 2 for the following reasons:
1. Possible jams
2. Possible injuries to your hands if the D544 Decurler Unit is installed and the door
or the punch unit is open
To Next Page
Loading...
