Ricoh Taurus-C1a - D059 RTB 95: Part Changes - New ball bearings

Technical Bulletin PAGE: 1/2
Model: Katana-C2 (D059) Date: 26-Jan-12 No.: RD059095
Subject: Part Changes - New ball bearings-
Prepared by: A. Takada
From: PP Service Planning Department 1G
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other ( ) Tier 2
Change: New ball bearings
Reason: To prevent possible breakage of the ball bearings installed in the transfer timing
roller of the registration unit
Model: Katana-C2 (D059)
Old Part
Number
New Part
Number
Description Q’ty Int Page Index Note
B2342628 M0777428
BALL BEARING
:REGISTRATION:DRIVEN:FRONT
1 X/O 82 17 Change
B2342629 M0777429
BALL BEARING
:REGISTRATION:DRIVEN:REAR
1 X/O 82 18 Change
- G0603293
SPACER:6.1X8.5X0.5
2 X/O 83 23 Add
NOTE: When replacing the above parts, replace all 3 parts as a set.