Ricoh Taurus-C1a - Page 179

T echnical B ulletin PAGE: 6/6
Reissued:11-Jun-12
Model: Taurus-C1a/C1b (D074/D075) Date: 29-Feb-12 No.: RD074049a
7. Remove the shaft [A]
Installation
Follow the above procedure in the reverse order.
Note
When installing the encoder shaft, make sure to fasten the shaft with a wrench until the
shaft locks. Do not further fasten after the shaft locks because doing so will cause the
shaft to lose its grip.
[A]