Technical Bulletin PAGE: 1/1
Model: Taurus-C1a/C1b (D074/D075) Date: 16-May-13 No.: RD074103
Subject: Service Manual Correction (PM parts in Image
Transfer Unit)
Prepared by: Shinnosuke Sasaki
From: 1st PP Tech Service Sec., PP Tech Service Dept.,
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Classification:
Product Safety Other ( ) Tier 2
Please make the following correction in your Taurus field service manual in the section:
3. Preventive Maintenance > PM Tables for Main Machines > Image Transfer Unit
The bias roller is NOT a PM part. The image transfer rollers that are located under the
drums are the PM parts.
For the replacement procedure, refer to the following section of the field service manual:
4. Replacement and Adjustments > Image Transfer Belt (ITB) Unit > Image Transfer
Rollers
Image Transfer Rollers
To Next Page
Loading...
