Technical Bulletin PAGE: 1/16
Model: Taurus-C1/P1 (D074/D075/M044) Date: 10-Apr-12 No.: RD074060
Subject: Complete Registration Procedure (Skew/ Image
Position/ Front and Back Correction)
Prepared by: T. Komori
From: PP Service Planning Department 1G
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other ( )
Action required
Service manual revision
Retrofit information
Tier 2
This RTB covers all the procedures involving registration adjustments – skew, image
position and front-back magnification correction*. Note that these procedures should be
followed BEFORE making registration adjustments on the Fiery controller.
* Front-back magnification correction is the function in the IMSS (Custom Paper - Advanced Settings).
Contents
1. Skew Correction
1-1. Perpendicularity adjustment
1-2. Achieving the recommended skew range
1-3. Possible problems involving skew correction
2. Image Position Adjustment
3. Front Back Magnification Correction (IMSS)
NOTE;
9 Use high quality paper to get accurate results – factory cut, good storage conditions.
9 Use a magnifier and a scale to get accurate measurements.
9 Factors that affect the result of the adjustments such as paper type, paper brand,
machine settings, operational environment, etc are most noticeable on ‘plain/thin’
paper.
9 Make sure to apply the following firmware version or newer.
Engine System Web Support
Copier (D074/D075) 1.58.04 1.07 1.06
Printer (M044) 1.58.04 1.03 1.04
To Next Page
Loading...
