Technical Bulletin PAGE: 3/3
Model: Taurus-C1a/C1b/P1 (D074/D075/M044) Date: 02-Apr-12 No.: RD074059
4. Install the new CIS unit, attach the cover, and push the right drawer back into the
machine.
5. Turn on the machine.
Note
Disregard the Jam001 that will be initiated when the machine is turned on in this state.
6. Enter the SP mode and execute SP1-912-001.
7. Exit the SP mode and remove the paper to complete the procedure.
Note
If Jam98 occurs after completing the CIS LED adjustment, follow the troubleshooting
instructions for Jam098.
To Next Page
Loading...
