Ricoh Taurus-C1a - RTB 49 a: Procedure for Replacing the Encoder Shaft

T echnical B ulletin PAGE: 1/6
Reissued:11-Jun-12
Model: Taurus-C1a/C1b (D074/D075) Date: 29-Feb-12 No.: RD074049a
RTB Reissue
The numbers of the steps were corrected and a photograph was deleted.
Please add the following procedure for replacing the Encoder Shaft to your Taurus service
manual.
Overview of the Encoder
! Encoder shaft [A]
! The encoder is installed in the housing [B].
Subject: Procedure for Replacing the Encoder Shaft Prepared by: Shinnosuke Sasaki
From: 1st Tech Service Sect., PP Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other ( ) Tier 2
[A]
[B]