Ricoh Taurus-C1a - Page 175

T echnical B ulletin PAGE: 2/6
Reissued:11-Jun-12
Model: Taurus-C1a/C1b (D074/D075) Date: 29-Feb-12 No.: RD074049a
Procedure for Replacing the Encoder Shaft.
Preparation
1. Pull out the ITB unit to the second position according to the service manual in the section:
4. Replacement and Adjustments > Common Procedures > Pulling Out the ITB Unit >
2nd Stop Position
The encoder shaft [A] can be reached in this position.
[A]