Ricoh Taurus-C1a - RTB 134: Field Service Manual Correction (SC465)

Technical Bulletin PAGE: 1/1
Model: Taurus-C1/P1 (D074/D075/M044)
Date: 15-Feb-16
No.: RD074134
Subject: Field Service Manual Correction (SC465)
Prepared by: J. Ohno
From: 1st Tech Service Sect., PP Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other ( )
Action required
Service manual revision
Retrofit information
Tier 2
Please add the following detail information on the sub codes of SC465 to your FSM in
section:
Appendices  6. Troubleshooting  SC Tables  SC400: Around the Drum
No.
Sub code
Type
Details (Symptom, Possible Cause, Troubleshooting Procedures)
SC465
001 ~ 024
D
PTR Motor Error: Abnormal Pulses
One (or both) of the encoder sensors cannot correctly detect the
pulses.
 PTR motor harness disconnected or broken
 Physical obstruction blocking operation of the PTR unit
 Motor or motor drive board defective
 TDCU defective
41
D
PTR Motor Error: Motor Defect
Motor is physically broken or harness is disconnected.
 Motor harness disconnected or broken
 PTR motor defective
51
D
PTR Motor Error: Abnormal Rotation Speed
The rotation speed of the motor is not within the target range.
 PTR motor harness disconnected or broken
 Physical obstruction blocking operation of the PTR unit and
ITB cleaning unit
 TDCU defective
 PTR motor defective
52
D
PTR Motor Error: Continuous Heavy Load
The motor is turned off after detecting excess load for more than
ten seconds.
 PTR motor harness disconnected or broken
 Physical obstruction blocking operation of the PTR unit and
ITB cleaning unit
 TDCU defective
 PTR motor defective