Technical Bulletin PAGE: 16/16
Model: Taurus-C1/P1 (D074/D075/M044) Date: 10-Apr-12 No.: RD074060
Appendix 2: Specification of SP1001-001 ~ 007, and SP1501-001
Margin registration in the sub scan direction is adjusted at the factory for each paper
weight as shown in the following table.
Therefore, modifying the value of SP1501-001 will modify the value X for paper of all
different weights. (For details, see RD074022a.)
Default settings
SP
Default
1001-001 0
1001-002 0
1001-003 0
1001-004 – 0.1
1001-005 – 0.2
1001-006 0
1001-007 – 0.1
1501-001 “V”
“V” is adjusted at the factory for each machine.
SP1501-001 is available only from the firmware version shown on the first page of this
bulletin or newer. Old machines are set as follows.
SP
Default
1001-001 V
1001-002 V
1001-003 V
1001-004 V – 0.1
1001-005 V – 0.2
1001-006 V
1001-007 V – 0.1
1950-001 None *
“V” is adjusted at the factory for each machine.
* When the firmware is updated to the latest version, SP1950-001 will be set to “0”.
To Next Page
Loading...
