T
echnical
B
ulletin PAGE: 2/3
Reissued:2-Sep-13
Model:
Taurus-C1/P1 (D074/D075/M044)
Date:
29-Feb-12
No.:
RD074048a
D
Procedure for Removing the Drum Charge Roller Gear
General Notes
1. Work carefully to prevent the grease applied to the gear from adhering to the drum
charge roller.
2. Check that the surface of the drum charge roller is clean and unscratched.
Procedure
1. Remove the drum charge unit from the PCDU and locate the gear.
2. Remove the drum charge roller [A] from its case.
3. Remove the drum charge roller gear [A] (and the two washers [B]).
[A]
[A]
[B]
To Next Page
Loading...
