Technical Bulletin PAGE: 10/16
Model: Taurus-C1/P1 (D074/D075/M044) Date: 10-Apr-12 No.: RD074060
11. Measure the distances (b1) and (b2) on all 5 copies and calculate the average.
12. Divide the average value by “2” and subtract that value from the current SP1501-001
value.
Average of
(b1) and (b2)
Average
divided by 2
Current SP1501-
001 value
Modified SP1501-
001 value
Example: 3.0 (mm) 1.5 1.0 - 0.5
The modified SP1501-001 value will be derived by adding instead of subtracting if the
trimming area of the 1
st
side is closer to the paper edge than that of the 2
nd
side.
Average of
(b1) and (b2)
Average
divided by 2
Current Value
of SP1501-001
Modified Value
of SP1501-001
3 (mm) 1.5 1.0 2.5
13. Input the modified values in SP1501-001 and make another 11 copies of test pattern
Trimming Area (SP2109-003-14) in b/w, and duplex to check the results for the 4th
and 8
th
copies.
14. Finally, confirm the adjustments made are also reflected to papers of different weights.
If further adjustments are needed, modify the values in SP1001-001 ~ 007 accordingly.
See the last page of this bulletin for details.
This completes the image position adjustment.
To Next Page
Loading...
