T
echnical
B
ulletin PAGE: 2/2
Model:
Taurus-C1/P1 (D074/D075/M044)
Date:
16-May-12
No.:
RD074065
ACTION
For symptoms #1 & #2
Check the harness routing of the Pressure Roller Fan. If the harnesses are not routed
correctly, replace with a new fan. Carefully replace the fan so that the harnesses stay
within the groove. You may also cover the harnesses with an insulation tape as shown in
the photo below.
Replacement of the Pressure Roller Fan for other purposes
If the Pressure Roller Fan needs to be replaced for any other reasons, make sure the
harnesses are routed in the groove.
To Next Page
Loading...
