T
echnical
B
ulletin PAGE: 7/8
Reissued:20-Jun-12
Model:
Taurus-C1/P1 (D074/D075/M044)
Date:
16-May-12
No.:
RD074068a
13. Hold the components as shown in the photo, and remove the gears and the shaft
together from the black case.
14. Take grease from the gear installed in the old shaft assembly and apply it to the gear
installed in the new shaft assembly.
15. Insert the new shaft assembly into the black case.
NOTE: If the gear has absorbed
the grease and the
amount of grease is
insufficient for reuse on
the new gear, procure
the grease registered
with the service p/n
VSSG9001.
To Next Page
Loading...
