T
echnical
B
ulletin PAGE: 3/4
Model:
Taurus-C1/P1 (D074/D075/M044)
Date:
24-May-12
No.:
RD074071
2. Remove the drum cleaning unit [A] from the PCDU. (Refer to the field service manual.)
3. Use your fingers to apply the Zinc Stearate Powder on the front cleaning blade edge
and seal [C] AND rear cleaning blade edge and seal [B]. Especially, powder should be
applied on the edge of cleaning blade [D] (indicated with the circle in the above photo.)
The photos below show the drum cleaning unit before/after applying the lubricant powder.
Make sure the powder covers this corner
[A]
[B]
[C]
[D]
After
Before
To Next Page
Loading...
