Technical Bulletin PAGE: 2/11
Reissued:04-Jul-12
Model: Taurus-C1/P1 (D074/D075/M044) Date: 24-Oct-11 No.: RD074029d
Troubleshooting Shock-jitter of Cause 1
There are several actions you can take to troubleshoot shock jitter. The actions and the
order they are implemented will vary depending on the color mode (B/W or Full Color) and
the paper weight (thicker or thinner than Paper Weight 4) in use, as shown in the table
below. Details of each action are on the following pages.
Mode Paper Weight Try these actions
from left to right
Thicker than 4 Action b - B/W
Thinner than 4 Action a Action b
Thicker than 4 Action b Action c FC
Thinner than 4 Action a Action b
Example
For shock jitter reported by a customer who uses Paper Weight 5 and FC mode, first do
Action b. If the results do not satisfy the customer, then do Action c.
To Next Page
Loading...
