Technical Bulletin PAGE: 3/8
Reissued:30-Jul-12
Model: Taurus-C1/P1 (D074/D075/M044) Date: 11-Jul-12 No.: RD074078a
2. Check the following:
Which color shows the uneven density?
Which side is the density lower, the top or the bottom?
3. If the density is lower at the bottom than the top, reduce the value in the Skilled
Operators Menu for the affected color. If the density is higher at the bottom, increase the
value.
4. Print the test pattern again to confirm the results.
5. If the results are unsatisfactory and require further adjustments, do Procedure B.
To Next Page
Loading...
