Technical Bulletin PAGE: 2/2
Model: Taurus-C1/P1 (D074/D075/M044) Date: 30-Jul-12 No.: RD074083
View of the charge roller at the rear
Action
Until the modified packaging becomes available for the drum charge units, when replacing
the drum charge unit, make sure that the charge roller is set properly on the holder,
exhibiting no gap between the bushing and the holder.
However, if the charge roller is set incorrectly, simply press down the bushing and fix it to
the holder.
Do the same for charge rollers included in the TCRU/ORU kits.
Gap
To Next Page
Loading...
