T
echnical
B
ulletin PAGE: 13/20
Reissued:18-Feb-13
Model:
Taurus-C1/P1 (D074/D075/M044)
Date:
08-Jan-13
No.: RD074097c
(b) Thin paper jam (see limitation list #3, 4)
Symptom
Paper jam around the paper transfer area
Cause
The separation bias has been turned off for textured paper so that it does not interfere with the paper
transfer current.
Action
Adjust the separation voltage. Specify the following settings according to the thickness of the paper being
used.
Advanced Settings Paper Weight 1 Paper Weight 2-3 Paper Weight 4-7
48: Txt Ppr: Ppr Trns Isolatn Voltag: Side
1 (SP2-825-xxx)
11 10.4 9
49: Txt Ppr: Ppr Trns Isolatn Voltag: Side
2 (SP2-826-xxx)
11 10.4 9
1. Is paper jammed at the paper transfer roller?
Yes Adjust the separation voltage according to the thickness of the paper being used.
No See 4, "Troubleshooting Paper Delivery Problems", Troubleshooting.
2. Print the image.
3. Do vertical white streaks appear?
Yes Contact your supervisor.
No Finish
Possible Side Effect
Enabling the separation voltage may cause vertical white streaks to appear.
To Next Page
Loading...
