Ricoh Taurus-C1a - Page 39

Technical Bulletin PAGE: 2/2
Reissued:24-Aug-11
Model:
Taurus-C1 (D074/D075)
Date:
19-Aug-11
No.:
RD074018a
Check Procedure
1. A ream of paper is sealed in a plastic bag and loaded in Tray 2 at the factory. Set this
paper in Tray 2. This paper is produced in Japan and is the same brand used for print
samples included with the accessories.
2. Set the mode to “copy mode”. (Brightness of the image will differ from the samples from
the factory if printed via EFI.)
3. Do the SPs in sequence as in the table below for a total of 11 test patterns.
Step 1 Step 2 Step 3
Print Image Color SP2109-003 SP2109-005
SP2109-
006(K)
SP2109-
007(C)
SP2109-
008(M)
SP2109-
009(Y)
1
Print Test
Pattern Overall
BK
26: Full Dot
Pattern
5: Black 15(default)
15(default) 15(default) 15(default)
2
Print Test
Pattern Overall
C
26: Full Dot
Pattern
2: Cyan 15(default) 15(default) 15(default) 15(default)
3
Print Test
Pattern Overall
M
26: Full Dot
Pattern
3: Magenta 15(default)
15(default) 15(default) 15(default)
4
Print Test
Pattern Overall
Y
26: Full Dot
Pattern
4: Yellow 15(default)
15(default) 15(default) 15(default)
5
Print Test
Pattern Overall
R(MY)
26: Full Dot
Pattern
1: Full Color 0 0 15(default)
15(default)
6
Print Test
Pattern Overall
G(CY)
26: Full Dot
Pattern
1: Full Color 0 15(default) 0 15(default)
7
Print Test
Pattern Overall
B(MC)
26: Full Dot
Pattern
1: Full Color 0 15(default) 15(default)
0
8
Print Test
Pattern 4by4
BK
13:Independent
Pattern (4 dot)
5: Black 15(default)
15(default) 15(default) 15(default)
9
Print Test
Pattern 4by4
C
13:Independent
Pattern(4 dot)
2: Cyan 15(default)
15(default) 15(default) 15(default)
10
Print Test
Pattern 4by4
M
13:Independent
Pattern(4 dot)
3: Magenta 15(default) 15(default) 15(default) 15(default)
11
Print Test
Pattern 4by4
Y
13:Independent
Pattern(4 dot)
4: Yellow 15(default) 15(default) 15(default) 15(default)
4. Confirm that the image quality is the same by comparing the output against the print
samples from the factory.