Technical Bulletin PAGE: 7/7
Reissued: 30-Nov-15
Model: Taurus-C1/P1 (D074/D075/M044)
D
The ITB drive shaft shown below is the NEW type without the ribs; flatted edge.
The ITB drive shaft shown above is the former type without the ribs; flatted edge.
Please be noted that this former type has a higher chance to loosen the encoder shaft.
Former type ITB shafts to be replaced with the new type. (All ITB drive shafts stocked as
service parts are of the new type with the ribs.)
To Next Page
Loading...
