T
echnical
B
ulletin PAGE: 4/6
Reissued:25-Oct-13
Model:
Taurus-C1a/C1b
Date:
27-Jun-13
No.:
RD074107a
Note
Use the knob stored in the front cover to rotate the fusing belt. If the knob is lost, it can be ordered
with p/n D0744225.
5. After polishing the fusing belt, put back the fusing unit.
6. Print out sample copies and check if the vertical lines have disappeared.
NOTE
Make sure to polish the front and rear (operator and non-operator) sides of the fusing belt
because belt scratches are generated by both front and rear edges of paper.
To Next Page
Loading...
