Technical Bulletin PAGE: 5/25
Model: Taurus-C1a/C1b (D074/D075)
3. Insert the cleaning tool into the doctor gap from the corner without the angled tab. The tab
scrapes off the toner/dust adhered to the doctor blade as you slide the tool across the doctor
gap.
Note
The tool is registered as a service part with the following part number:
D0749548: DG CLEANER 5PCS/SET
4. Slide the tool from right to left. Maintain level as you slide the tool to prevent scratches on the
development roller.
To Next Page
Loading...
