Ricoh Taurus-C1a - Page 483

Technical Bulletin PAGE: 4/7
Reissued:14-Oct-14
Model: Taurus-C1a/C1b (D074/D075)
Date: 10-Jun-14
No.: RD074120a
B) Lubrication of the cleaning blade edges
1. Use your fingers to apply Zinc Stearate Powder (D0159501) on the following locations:
 Front edge [C] and rear edge [B] of the cleaning blade
 Front and rear sponge seals [D]
The lubricant powder should be applied, especially on the corners of the blade [D]
(indicated with circles in the photo below).
2. These photos show the drum cleaning unit before and after applying the lubricant
powder.
After
Before
Make sure the powder covers this corner