Technical Bulletin PAGE: 4/34
Reissued: 4-Jun-15
Model: Taurus-C1a/C1b/P1 (D074/D075)
2. How to activate NICE
2.1 Procedure
1. Turn off the machine power.
2. Insert the NICE SD card into the service slot on the GW controller box.
3. Turn on the machine power.
4. Confirm the operation panel displays the NICE main menu screen.
NOTE
If the NICE main menu screen does not appear after doing the above, press the
‘Program’ key on copier models, ‘Printer’ or ‘Fiery (driven)’ key on printer models.
NICE SD card must be inserted into the service slot on the controller box, NOT the
slot on the operation panel.
Make sure to turn off the machine power before removing the SD card from the card
slot on the controller box.
When removing the SD card from the PC right click on the SD card in Explorer and
select ‘Eject.’
NICE Menu Screen
Main menu screen
Pro C901 series and Pro C651/751 series
To Next Page
Loading...
