Ricoh Taurus-C1a - Page 513

Technical Bulletin PAGE: 23/34
Reissued: 4-Jun-15
Model: Taurus-C1a/C1b/P1 (D074/D075)
Date: 17-Jun-14
No.: RD074119a
13. Wait for the Banding Analyzer window to appear. Select the product model from
Menu  Group  Products.
14. Click Run, then select and save the dat file created in step 12.
15. Excel will launch automatically after the calculation completes to display the
parts/units that should be inspected to resolve bands in the order of
effectiveness.
Higher the bar, higher the necessity of the inspection.
NOTE: When the Banding Analyzer does not automatically start, please select
from  Start  All Programs  NICE  Banding Analyzer.