Technical Bulletin PAGE: 4/58
Model: Taurus-C1 / P1 Date: 21-Oct-11 No.: RD074026
< Main Machines \ New Features >
Illustration and description of the “Improved Paper Path” were revised.
Before the Revision After the Revision
To support printing on 300 g/m2 paper and duplex
printing on paper up to 256 g/m2, the arcs in the
curvature of the paper path are wider at three critical
turning points: [1] Paper feed (2nd tray, 1st tray, and
duplex path junction), [2] Paper entrance from LCIT
and paper registration, and [3] Inverter/ duplex path.
The number of shift rollers has been increased from
two to four to accommodate postcards and large-size
thick paper.
To support printing on 300 g/m2 paper and duplex
printing on paper up to 256 g/m2, the arcs in the
curvature of the paper path are wider at three critical
turning points:
• [1] Paper feed (2nd tray, 1st tray, and duplex path
junction where these paths merge)
• [2] Paper entrance from LCIT and paper
registration
• [3] Inverter/duplex path. The number of shift
rollers has been increased from two to four to
accommodate postcards and large-size thick
paper.
To Next Page
Loading...
