Ricoh Taurus-C1a - Page 539

Technical Bulletin PAGE: 2/2
Model: Taurus-C1a/C1b (D074/D075)
Date: 14-Jan-15
No.: RD074127
When replacing the ITB cleaning unit
1. Apply lubricant (p/n: D0159501) to the edge of the cleaning blade of the new cleaning
unit using the blower brush (p/n: D0747960).
Reference
Minimum lubrication
Maximum lubrication
2. Do the “After Transfer Belt Replacement” procedure on pg. 598 of the service manual.
NOTE: If SC446 persists, manually lubricate the ITB as described on the previous
page.
Lubricant p/n and tool:
B1329700
D0159501
D0747960
For ITB
For lubrication brush
(Mixed with lubricant powder
p/n: D0159500)
Use the brush on the head of the
blower to apply powder to the
lubrication brush.
Apply lubricant powder to the edge of the blade.