Technical Bulletin PAGE: 3/4
Reissued: 15-May-15
Apply grease S552R to the fusing roller
bearings when replacing the fusing
roller with a new one.
Apply grease S552R to the new
bearings when replaced.
Apply grease S552R to the pressure
roller bearings when replacing the
pressure roller with a new one.
Apply grease S552R to the new
bearings when replaced.
Fusing Roller
Separation Plate
Pressure Roller
Separation Plate
Heating Roller
Thermistor
Dry cloth, always clean at PM parts
replacement
Pressure Roller
Thermistor
Dry cloth, always clean at PM parts
replacement
Lubricate (FLUOTRIBO MG GREASE) at
PM parts replacement
Inspect at PM parts replacement